Search Results

The author outlines the history of the 550 submarine chasers built for the British Government between April, 1915, and November, 1916, and attributes the success of the undertaking largely to scientific standardization. He cites some of the early difficulties in obtaining supplies and tells how they were met, and mentions how and why the fabrication was carried out in this country and the assembly made in Canada. The paper concludes with citation of the principal dimensions of the boats, power, speed and cruising radius. In the course of the discussion the author refers further to the power plant and mentions some of the war-time duties of this type of craft.

The author first mentions hot-tube ignition, which preceded the spark-plug, then the low-tension type of make-and-break ignition, following with the development of spark-plugs. He compares the conical and petticoat types of porcelain and discusses at some length the insulating materials used in spark-plugs, such as porcelain, mica, steatite, glass and quartz. In this connection he covers the composition of the material, its dielectric strength, carbon-absorbing ability, heat-conductivity, mechanical characteristics, and the difficulties of glazing. Under the heading of general design of spark-plugs the author takes up such points as assembly of insulator and center electrode, electrodes, gaskets, and separable and integral plugs.

The author states that the purpose of the paper is to outline that phase of metallurgical work pertaining to the connection between the laboratory and production in the automotive industry. Reasons are cited for selecting certain designs for parts to facilitate machining, complete or partial case-hardening, finishing and assembling. The next step is the choice of materials, a subject which is treated at some length. The author then takes up in turn the field for standardization in steel specifications, inspection of materials, physical testing of steels, uniformity of composition of metals, heat-treating operations, methods of carburizing, depths of case-hardening, treatment after carburization, errors in overspeeding hardening operations and drawing heat-treatment at low temperatures. Types of pyrometers, operations on hardened work, inspection for hardness and selection of hardening equipment are some of the other topics discussed.

After a brief consideration of airplane-engine practice in France, England and Germany, the author outlines the problems encountered in designing a twelve-cylinder aviation engine. He explains at some length the difficulties in determining the connection between propeller and engine and shows why valve-in-head location was chosen. Such features of engine design as the mounting of carbureter and exhaust pipes, methods of fuel and lubricant supply and details involved in selecting the lighting, starting and ignition equipment are considered.

The question as to whether a part should be made or bought is one that must be settled by the individual maker according to the value of his product, the nature of the part, his capital available for manufacturing purposes and the price at which his product is sold. The author describes the practice followed by some of the large companies, showing that in spite of their being quantity producers, they have found it desirable to buy a number of important parts. Certain parts are rarely made by automobile manufacturers, either because they can be bought more cheaply or because the machinery to produce them is intricate. The author sums up the problem by stating that a manufacturer makes the unit on account of not getting deliveries or because he does not get a fair price from the parts maker or an article good enough to satisfy his conditions. In order to give individuality to the product, the car maker often produces certain parts, such as the engine, himself.

The author limits his consideration of rear axles to that of the bevel-gear type and takes up the subject under the heads of load-carrying member, gearing, driving-shaft, brakes and materials. Several different forms of cast and pressed axle housings are briefly described. Mention is then made of the axle gearing and data given showing the end thrust for straight-tooth bevel pinions. The methods of supporting pinions and of attaching bevel gears to the differential are discussed. Forms of differentials are considered, several different conventional types being illustrated. The subject of driving shafts is briefly reviewed, as is also that of brakes and brake materials. The author concludes his paper by figures showing the tensile strength, elastic limit and elongation of the metals used in the various parts of the rear axle and also explains some oil-retaining and dust-protecting features of design.

This paper is mainly an argument in favor of the use of large, single rear wheel truck tires instead of smaller dual tires. Although the practice of using large singles is comparatively new, the author gives the results of experience and research to show the advantages of the newer method of rear tire equipment. In developing his arguments in favor of single tires, the author goes into the history of dual tire application to show why it was necessary to use two tires in the earlier days of truck operation. As the necessity for increased carrying-capacity grew, tire manufacturers found the then existing single tire equipment inadequate, and they set about to develop suitable equipment to meet the new condition, the result being dual practice. The method of attaching the earlier dual tires is shown to have been poor, resulting in circumferential creeping of the whole tire to a much greater extent as the width of the dual equipment increased.

An all-ceramic swirl chamber has been developed and analyses and evaluations concerning the strength of silicon nitride ceramic (Si3N4) have been performed with a view to using it for the entire internal wall surface of the swirl chamber. The strength characteristics of Si3N4 and their effect and variation have been determined. On the basis of measurements and analyses of thermal stresses, assembling stresses, etc., investigation of the most suitable construction and assembling methods to reduce load stresses on ceramic, and various kinds of duration tests, the swirl chamber has been confirmed to have the required durability. This engine was found to comply with the 1987 U.S. diesel particulate regulation.